On May 22, with laptop, overly-detailed excel spreadsheet, and solid strategy in mind, I boarded a plane destined for Reno, Nevada. My fine Hyundai Santa Fe rental then took me half-an-hour south to Carson City (just 6.5 miles east of Mound House), to the hotel I would call home for the next 13 nights.

That first evening, I had the pleasure of meeting Rob Vugteveen, self-proclaimed and former Northwest Territorial Mint employee, and his family. Rob graciously offered his services to the project. Over dinner, we discussed the goals I had set for the following two weeks: (1) to prepare nearly 20,000 die shells for absorption by the ANS upon their arrival in New York City, and (2) to better pack the 5,000 of the more delicate pieces in order to survive the 2,700-mile journey. However, the magnitude of the collection (both in the vastness of the archive itself as well as the diameter of the individual pieces), proved challenging to these lofty goals.

Figure 1. Jesse Kraft (r.) and Rob Vugteveen (l.) in Mound House, NV, beginning to prepare the MACO die shells for their journey across the country.

Pallet-by-pallet, we compared them to the MACO Spreadsheet and used red and green Sharpies to mark the individual item labels with their respective color. From there, we were essentially able to ditch the spreadsheet and work directly from the boxes. We now began on an item-by-item level-opening each box and separating the and the from one another-placing each category into a new box and sealing it when it reached its max weight (ca. 50 pounds), which left most boxes grossly (but necessarily) under-packed.

We had gone through 12 pallets (192 boxes) before suddenly realizing that, at this rate, we would run out of time without even starting on our second task. One achievement from the process, however, was that by the time we were through those 192 boxes, there were only 182 boxes left on the pallets, as we were able to condense those initial boxes by about 5%. Even greater efficiency was found in the fact that we were able to stack the boxes 5-high (as opposed to 4-high, as they previously were) due to information garnered from the shipping companies. This simple change saved an astounding 25% of space.

The next day's focus was on task number two: repacking what truly needed to be repacked. Due to time constraints in 2018, only about 15,000 of 20,000-odd die shells were photographed, individually wrapped, and safely packed into boxes. At that time, the crew was unable to complete the final 5,000 objects of the collection, so (out of necessity) they were hastily stacked into boxes directly on the pallet. Packed for a quick 6-mile jaunt from Dayton to Mound House, they would not likely survive the 2,500-mile journey they are about to make. Sadly, even now, we found pieces that were clearly broken in their prior transit, not before.

Figure 5. Epoxy die shells for the 1986 ANS medal to commemorate the centennial of the Statue of Liberty.

Most of these objects are epoxy die shells (Figs. 5 & 6). Epoxy die shells were introduced in 1975 as a cheaper and quicker alternative to copper galvano die shells. Unlike the hardy copper die shells made by MACO, the epoxy die shells are quite fragile and if one were dropped on the floor, it could easily shatter on impact. Not only were these most-fragile die shells in direct contact with each other, but each box weighed far beyond their intended capacity.

I am happy to report that Rob Vugteveen and I achieved 95% of what we had hoped to before the time came for me to leave. Thankfully, Rob lives nearby and is able to wrap everything up before the trucks arrive. All in all, the second phase of getting the MACO die shells from Mound House to Manhattan was a success.

To read the complete article, see:
FROM MOUND HOUSE TO MANHATTAN, PART II(http://numismatics.org/pocketchange/mound-house-ii/)

To read the earlier E-Sylum article, see:
MOVING THE MEDALLIC ART COMPANY ARCHIVES(https://www.coinbooks.org/v24/esylum_v24n29a32.html)