Crematorium Identification Tags - A Brief Introduction
by Heather Schena

Crematorium identification tags appear in some collections and online sales described as "tokens" (implying there is some sort ofnumismatic function). This is understandable since most people do not often see these tags and they have some characteristics in common with tokens.A brief introduction to the appearance and use of these metal tags will educate collectors so they may identify these pieces more readily.

The cremation tag in the United States has relatively short history. Jason Engler, Historian for the Cremation Association of North America,states:

These tags are used to identify the deceased throughout the cremation process. As seen in the example below, there is a serial number on the tag(2989 in this case) which is written on the paperwork associated with a particular decedent. It is placed inside the door of the retort (cremationoven) during cremation; this is why it looks so worn - it's been exposed to temperatures at 1600 degreesF+. The tag stays with the ashes (cremains)afterwards and is included in the urn when the ashes are handed over to the family. It is either tied to the bag with a twist tie or is dropped intothe bag with the ashes. When the cremains are returned to the family they are usually in a temporary container; when they are transferred to apermanent container or if the ashes are scattered the tag can be easily separated from them.

To identify this specific example, I found a listing for "Yates Wilburt Vault Co." in Charlotte and called them to see if they wereaffiliated with the company on the medal only to learn that it was the same company. Yates Cremation Service has contracts with other funeral homesto do their cremations (so a funeral home can offer the service without having to build their own crematorium). This also explains why it was notlisted by itself when I did a Google search. They were able to tell me that the date of death for this specific decedent was in 1991. Dan Yates,president of the company, told me that it is no longer their policy to put the name of the company on the tags since (at least in theory) it could betraced back to a specific person, so it will be close to impossible to track down a date or location for these tags in the future.

It is worth noting that should a collector find a tag with the name of a funeral home and a serial number, it could be traced back to a specificindividual and discretion should be used in determining how vigorously additional information is pursued.

The tag blanks I have found for sale are usually stainless steel (brass and titanium are rarer options) with the name of the crematory and theserial numbers engraved by the manufacturer. Stainless steel is ideal since it withstands high temperatures. Higher nickel and chromium contents alsomean that many of these tags are not magnetic, though they are still considered stainless steel. Below is an example of a tag prior to exposure tocrematorium temperatures; comparing it with the previous example gives some indication as to the stresses endured by the tag.

While these tags are not numismatic in nature, knowing about them and their purpose will assist collectors who may run across one of them in theirtravels. However, there are a few collectors of these tags who appreciate the importance of their use, and by educating the greater collecting publicabout them this appreciation can grow.

Yates tag photos courtesy of Eric Schena
Tulsa, OK tag photo courtesy of Mr. Jason Engler

For more information on the Token and Medal Society, see:
www.tokenandmedal.org/